+86-13292700517
0102030405
Cassette single facer
Use and Characteristics:
1.360E design speed: 200m/min 320E design speed: 180m/min
2. Effective width: 1400mm- 2200mm.
3. Corrugated roller diameter: φ360mm φ320mm
4. Adopt negative pressure type design, so that the core paper can be uniformly pressed and attached to corrugated surface,
5.evenly coated with glue to make the single corrugated corrugated paper better.
Fast change roller, 10 minutes, replace the corrugated roller with electric trolley, into the machine, fixed on the machine
base, quick and easy to replace the corrugated roll.
6. Corrugated roller and wall-e roller are adopted with high stability air bag control system.
7. The control of glue volume control adopts electric adjustment, the rubber device is electric, and the gluing system can operate
independently when the host stops, preventing the glue from drying up.
8. The portable gluing system is more convenient for maintenance and maintenance than cleaning.
9. Simple operation control system, touch screen operation interface, display operation state with color drawing, easy to operate.
10. Built-in preset with spray system to adjust core paper temperature and moisture.
| SF-320E | Cassette type single facer | Corrugated roller ¢ 320mm, Tungsten carbide coating, electric trailer 10-minute rapid change of tile roller, energy-efficient synchronous belt rotation, maintenance-free airbag pressurization, independent coating unit, PLC automatic control plastic, man-machine interface touch screen, Paper automatic parking pressure relief. |
Structural features for single facer
★ main flute roller：￠320mm（according flute differ），pressure roller￠370mm，preheat roller￠400mm
★ using negative pressure type design, low heat loss，helps the core paper to press evenly and close to the surface of corrugated roller, make the corrugate molding better, pressure uniform, the top of corrugate can glue uniform and better.
★ quickly change rollers in 10 minutes, while change corrugated roller with the electric trolley loading,the entire group of corrugating with motor drive,put into the machine,fixed to the machine base,only need a few buttons can complete the replacement quickly.
★ corrugated roll adopt 48CRMO high quality alloy steel,dealing with heating, after grinding hard chrome plating surface treatment
Regular technical parameters
| operation direction | left or right |
| design speed | 150m/min |
| temperature range | 160—200℃ |
| air source | 4—0.9Mpa |
| steam pressure | 8—1.3Mpa |
| corrugated flute | UV type or UVV type |
Powered motor parameters
| main frequency drive motor | 22kw | ||
| suction motor | 11KW | rated voltage | 380V 50Hz |
| glue reducer | 100W | rated voltage | 380V 50Hz |
| glue gap motor | 400W | rated voltage | 380V 50Hz |
| glue pump motor | 2.2KW | rated voltage | 380V 50Hz |