Sales and Support: +8617736472555
  • twitter
  • facebook (1)
  • Youtube (35)
Leave your message

Hydraulic Shaftless Mill Roll Stand

This hydraulic shaftless mill roll stand features a symmetric double-rod four-arm structure that supports two paper rolls simultaneously for non-stop production. Hydraulic drive delivers stable clamping, lifting and deviation correction. Toothed chucks minimize paper waste, and top multi-point/manual tension brake enables flexible control. Available in V5B (2.5t load, φ242mm spindle) and V6B (3.5t load, φ270mm spindle), it fits 1200–2800mm paper width and 1500mm max roll diameter.

    1

    Using double - rod cylinder symmetry four arms structure, can support two volumes of original paper at the same time.

    2

    Through the hydraulic transmission mode, the clamping, lifting and deviation of the paper roll are realized.

    3

    The top end adopts multi-point brake or manual tension brake. The top adopts the tooth-shaped chuck to reduce the waste of paper.

    4

    The width of the original paper is from 1200mm to 2800mm and the diameter of the supporting paper is 1500mm.

    5

    Maximum weight: V5B: 2.5t V6B: 3.5t.

    6

    Spindle diameter: φ 242mm/φ 270mm

    ★Symmetrical structure can also install two bundles of paper at the same time, Paper can be used for non-stop for a job;Adopts mechanical drive to complete the paper clamping, lifting, loosen, move on, around translational motion, etc.

    ★each shaftless mill roll stand is equipped with two pieces of paper guide, two set of paper car;paper guide the use of channel 14 and the guide post weld, paper car adopt 10mmwelded stell, the length of track is 6000mm.

    ★manual dics brake, add screw following

    ★electric elements centralized control the electric elements, toothed chuck.

    1

    Symmetrical structure can also be installed with two bundles of paper, paper can be used for a job; use mechanical drive to complete the paper clamp, lift, release, move forward, move around translation, etc.

    2

    Pneumatic single-point brake

    3

    Electrical components To centrally control the electrical components and expand the chuck

    Unwinding machine
    NO. Specification Item Parameter Details
    1 Paper Width 800mm-2200mm
    2 Paper roll Diameter 350--1500mm
    3 Maximum weight V5B:2.5t  V6B:3.5t 
    4 Spindle diameter φ242mm/270mm
    5 Main roller diameter 215mm
    6 Pneumatic Source Pressure(MPA) 0.4---0.8Mpa
    7 main frame 300H steel
    8 Power 380V  50Hz

    Production Line.Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.

    Equiped with uniform torsion  clutch, safe, easy and reliable operation.

    The structure is symmetrical, can load two rolls raw paper at the same time, can change the paper roll,without stop the machine.

    Request a Free Consultation & Quote

    Your Name*

    Phone Number

    Country

    Fill in the form above and we will send you detailed pricing, catalog and solution within 24 hours.*

    reset