+86-13292700517
0102030405
Full absorption five color slotting die cutting machine
technical parameters
|
Machine model |
1222 |
1224 |
|
Maximum mechanical speed (sheet/min) |
240 |
240 |
|
speed (sheet/min) |
200 |
200 |
|
MAX. feed size (mm) |
1200x2400 |
1200x2600 |
|
MIN. feed size (mm) |
320x600 |
320x600 |
|
Every piece of paper |
1300x2400 |
1300x2600 |
|
Maximum printing area |
1170x2200 |
1170×2400 |
|
Standard plate thickness |
4mm |
4mm |
|
Printing precision |
±0.5 |
±0.5 |
-
Feeding unit
◆ Can be continuous or separate sheet feed.◆ Leading edge feeding, feeding more stable and accurate.◆ Adjust the feeding schedule electronically to reduce the pressure of the paper roll.◆ Variable frequency control of vacuum air flow and pressure to fit the board size.◆ Dust removal device, brush and suction can remove the paper scraps on the cardboard surface.◆ Remove static device, release the static electricity of cardboard surface.◆ Paper roll gap adjustment, computer control.◆ Left and right stopper position, controlled by computer.◆ The back tray computer control before and after, speed up the setting.
Printing unit
◆ Two devices of massu quick hanging plate and scroll hanging plate: the left side and right side of the scroll hanging plate are locked to make the registration of hanging plate more accurate.
◆ The roller is equipped with a pneumatic high closing device, which synchronizes the main machine speed when the unit takes part in the printing. When the unit does not participate in the printing, it can stop the roller rotation, reduce the damage caused by operation error, and do not need to be cleaned at the same speed as the main machine.
◆ Printing phase, computer control. Transverse phase, computer controlled, range #10mm.
◆ Pressure roller gap adjustment, computer control. It is easy to adjust the gap between roller and roller.
◆ Printing phase fixed device, electromagnetic clutch brake brake structure. When the unit is separated and adjusted for phase or cleaning, the brake structure limits the rotation of the gear and maintains the original gear position.
◆ Automatic reset after cleaning the printing plate.
◆ An airtight cavity is formed by two pieces of spatula. The ink is installed in the scraper cavity, and the excess ink on the surface of the ceramic anilox roller is scraped, which can obviously improve the printing quality of monochrome mesh and mesh overlay.
◆ Pneumatic double diaphragm pump circulation ink supply. Automatic alarm device for missing ink to avoid damage to scraper and ceramic roller.
◆ Automatic cleaning system for scraper and ceramic roller.
Slotting unit
◆ Eight - axis slotting design, prepress line slotting
◆ Compact design of precompression line, increased diameter of wheel shaft, good rigidity
◆ Double ball screw transversely adjusted structure, accurate to the cutter, stable movement
◆ The machine is controlled by horizontal motion servo motor with high precision and fast positioning speed
◆ It is easy to maintain wear resistance by moving graphite copper sheet across the cutter
◆ Elastic Angle knife structure, three to five without adjustment
◆ Optional punching die holder, optional 8-axis design
◆ Prepress one pressure line one second pressure line one slot
Die-Cutting unit
Die roll (lower roll) :
◆ Cast steel material, surface fine grinding, hard coating.
◆ Balance correction to increase stability of operation.
◆ Suitable for cutting die height of 25.4mm.
◆ Thickness of wood template: 16-18mm(for three-layer plates); 13-15mm(for five-layer plates)
Cots (upper roller) :
◆ Balance correction to increase stability of operation
◆ Manually adjust the gap with the die.
◆ Mechanical transverse 40mm, phase adjustment mechanism of moving device:
◆ Planetary gear type structure, same as printing.
